![]() (if your ebay wiring is like mine, this will be the Yellow wire.) there's a good grounding spot to the bottom left of the driver's foot-well, just use a self-tapping screw. > connect the other lead from the switch to a good ground point. ![]() ![]() ![]() (if your ebay wiring is like mine, this will be the Red wire on the end of the connector.) make sure to zip-tie and secure the wiring cleanly along the OEM wiring path. > tap into the grey fog wire with a Tap Splice, a red 22-18 AWG is best, and insert one end of your fog on/off switch to the circuit. To prep the switch harness for use, remove the wire loom and cut the wires about 2-3 feet from the switch connector, making sure to cut past the point at which the 2 red wires are spliced together.
0 Comments
Leave a Reply. |